Pengaruh Ukuran Baut untuk Mengurangi Kegagalan Sambungan Pada Fleksibel Kopling Flange Di Unit Thermal Oil Heater
Kata Kunci:
Ukuran baut, jarak baut, kopling flangeAbstrak
In the industry, the use of a Thermal Oil Heater (TOH) is employed to generate a heating system by heating oil, which will be used in the production process in units that require a heating system. In the TOH unit, a pump is used to transfer the fluid, where the pump's connection uses a flange coupling to link the motor and magnetic pump for transferring thermal oil. The size and material of the bolts and nuts in the flange coupling are crucial to ensure operational safety and efficiency, taking into account rotation, power, and thermal expansion. Through observation, documentation, interviews, and literature studies, the research shows that the optimal nominal bolt diameter is 9.52 mm with a coupling distance of 60 mm, in accordance with industry standards such as the American National Standards Institute (ANSI), the International Organization for Standardization (ISO), and the Japan International Standard (JIS) to prevent joint failure and damage to the flange coupling
Referensi
[1] S. A. Kartika, N. H. Abdullah, And P. Saksono, “Energy Saving Analysis Using Burner /Thermal Tank And Heater Electric In The Marine Fuel Oil (Mfo) Treatment Process,” Sintek Jurnal: Jurnal Ilmiah Teknik Mesin, Vol. 17, No. 1, P. 7, Jun. 2023, Doi: 10.24853/Sintek.17.1.7-16.
[2] H. Darmadi, R. Sitompul, N. Tarigan, And D. Kurnia, “Kekuatan Lelah (Fatigue) Pada Pegas Ulir Tekan Di Unit Vibrating Screen Akibat Adanya Beban Siklik (Berulang) Menggunakan Uji Fatik (Fatigue Test),” Jurnal Mekanova : Mekanikal, Inovasi Dan Teknologi, Vol. 10, No. 1, Pp. 190–202, 2024.
[3] H. Hendri, S. Suhengki, And P. Ramadhan, “Analisa Efisiensi Boiler Dengan Metode Heat Loss Sebelum Dan Sesudah Overhaul Pt. Indonesia Power Ubp Pltu Lontar Unit 3,” Jurnal Power Plant, Vol. 4, No. 4, Pp. 218–227, 2017.
[4] H. Huda, T. Ruki Biyanto, An Fathoni, And T. Diwa Larasati, “Analisis Prediksi Model Fouling Pada Heat Exchanger Di Crude Oil Refinery Prediction Analysis Of Fouling Model On Heat Exchanger In The Crude Oil Refinery,” Jurnal Chemurgy, Vol. 06, No. 1, Pp. 88–99, 2022, [Online]. Available: Http://E-journals.Unmul.Ac.Id/Index.Php/Tk.
[5] M. Rais Zain And A. Mustain, “Evaluasi Efisiensi Heat Exchanger (He-4000) Dengan Metode Kern,” Jurnal Teknologi Separasi Distilat, Vol. 6, No. 2, Pp. 415–421, 2020, [Online]. Available: Http://Distilat.Polinema.ac.id
[6] F. D. Saputri And H. Hasnira, “Pengaruh Perubahan Temperature Demin Water Terhadap Heat Transfer Lube Oil System Before And After Maintenance Heat Exchanger Type Plate Pltgu. Panaran,” Jurnal Rekayasa Energi, Vol. 02, No. 01, Pp. 33–39, 2023.
[7] S. F. Dina, “Jurnal Rekayasa, Teknologi Proses Dan Sains Kimia The Utilization Of Palm Shells As A Substitute For Industrial Fossil Fuel On System Thermal Oil Heater,” Reprokimia, No. 2, Pp. 1–11, 2022.
[8] N. Fatowil Aulia, “Evaluasi Kinerja Pompa Sentrifugal Pada Sistem Thermal Oil Di Industri Pengolahan Makanan Menggunakan Software Psat,” Jurnal Teknik Energi, Vol. 17, No. 3, Pp. 239–251, 2021, [Online]. Available: Https://Jurnal.Polines.Ac.Id/Index.Php/Eksergi
[9] H. Darmadi And D. Kurnia, “Besarnya Tegangan Tarik Yang Diizinkan Pada Rantai Untuk Memutar Tippler Lori Yang Berisi Tandan Buah Matang (Tbm) Di Pt Z,” Jurnal Vokasi Teknik, Vol. 1, No. 3, Pp. 29–37, 2023
Unduhan
Diterbitkan
Terbitan
Bagian
Lisensi
Hak Cipta (c) 2024 Paul K S Harefa, irwansyah irwansyah, Herry Darmadi, Naqasya Asyrori Sidabutar, Dian Kurnia
Artikel ini berlisensiCreative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
