Besarnya Tegangan Longitudinal Dan Tegangan Tangensial Yang Terjadi Pada Dinding Bejana Bertekanan Di Unit BPV (Back Pressure Vessel) Akibat Adanya Tekanan Fluida Dari Dalam Pada PT. XYZ
Kata Kunci:
Generator, Back Pressure Vessel, Tegangan Longitudinal, Tegangan TangensialAbstrak
This research was carried out on a BPV (Back Pressure Vessel) unit where there are voltages acting within the pressure vessel which are capable of causing dimensional changes to the pressure vessel due to pressure. Pressure vessels can accommodate a wide range of elements covering several applications such as in the nuclear, oil, chemical industries, and oil and gas. With research methods carried out at the research site or carrying out field research activities. There are two ways of collecting this data, namely the interview method, which is a way of collecting data by holding interviews or direct questions and answers with heads of departments or company employees about BPV (Back Pressure Vessel) units. Observation Method, namely a method of collecting data by means of direct observation in the field of the object to be carried out carefully. The longitudinal stress that occurs is 158.13909 MPa and the tangential stress that occurs is 23.222 MPa for a working pressure of 3.2 Kg/cm2.
Referensi
[1] H. Darmadi, N. Kurnia, N. Nelza, And H. Sempana, “Analisa Ukuran Rpm Agitator Pada Washing Getah Di Unit Tangki Pencucian Pada Factory Precleaning Pt. X,” Reprokimia, Vol. 1, No. 1, Pp. 1–9, 2022.
[2] H. Panggabean And H. Darmadi, “Besarnya Gaya Radial Yang Terjadi Pada Sepasang Roda Gigi Lurus Akibat Adanya Sudut Tekan Dari Roda Gigi Penggerak Di Alat Double Deck Bunch Crusher,” Jurnal Vokasi Teknik, Vol. 1, No. 2, Pp. 10–16, 2023.
[3] H. Darmadi, D. Kurnia, And F. A. Malau, “Besarnya Deformasi Yang Disebabkan Oleh Tekanan Tbr
(Tandan Buah Rebus) Terhadap Poros Bunch Crusher,” Jurnal Mekanova : Mekanikal, Inovasi Dan Teknologi, Vol. 9, No. 2, 2023.
[4] H. Nugraha, I. Kusumaningtyas, And I. M. Miasa, “Analisis Buckling Dan Tegangan Bejana Tekan Horisontal Pada Tekanan Kerja Eksternal,” Journal Of Mechanical Design And Testing, Vol. 4, No. 2, Pp. 58–66, 2022, Doi: 10.22146/Jmdt.63592.
[5] M. Rodiawati, ) A Yudi, E. Risano, And A. Su’udi, “Perancangan Bejana Tekan (Pressure Vessel) Untuk Pengolahan Limbah Kelapa Sawit Dengan Variabel Kapasitas Produksi 10.000 Ton/Bulan,” Jurnal Fema, Vol. 1, No. 4, Pp. 36–41, 2013, Doi: 10.000.
[6] A. Yudi Eka Risano, A. Su, And R. Rahmat, “Oktober 2013) 1) Dosen Jurusan Teknik Mesin, Fakultas Teknik Universitas Lampung 2) Mahasiswa Jurusan Teknik Mesin, Fakultas Teknik Universitas Lampung Jln,” Jurnal Fema, Vol. 1, No. 4, Pp. 28–35, 2013, Doi: 10.000.
[7] E. Manullang, S. Tangkuman, And B. L. Maluegha, “Analisis Tegangan Pada Bejana Tekan Vertikal 13zl100040291 Di Pt. Aneka Gas Industri,” Jurnal Online Poros Teknik Mesin, Vol. 5, No. 2, Pp. 92–102, 2020.
[8] D. Darmanto And F. Adi Alfiansyah, “Prediksi Kegagalan Statis Pipa Saluran Uap (Vapor Line) Akibat Tekanan Kerj,” Jurnal Keteknikan Pertanian Tropis Dan Biosistem, Vol. 7, No. 3, Pp. 291–198, 2019.
[9] A. Husen And A. Jamaludin, “Analisis Tegangan Sistem Perpipaan Pada Sisi Tekan Pompa P-003e Menggunakan Program Caesar Ii Dan Perhitungan Manual,” Pp. 8–28, 2021.
[10] A. Husen, A. Setiyadi, And N. Cholis, “Analisis Tegangan Pipa 043-Gn-31004 Pada Scrub Coloumn Vessel Menuju Vessel Coloumn Proyek Tangguh Expansion Train 3 Papua,” Bina Teknika, Vol. 14, Pp. 139–152, 2018.
[11] A. Maulana, “Perhitungan Tegangan Pipa Dari Discharge Kompresor Menuju Air Cooler Menggunakan Software Caesar Ii 5.10 Pada Proyek Gas Lift Compressor Station,” 2016.
[12] N. Aziz, R. Waluyo, And D. Yuliaji, “Perancangan Prototype Konstruksi Pipa Industri Mengacu Pada Asme Code B 31.3,” Jurnal Almikanika, Vol. 5, No. 3, 2023
Unduhan
Diterbitkan
Terbitan
Bagian
Lisensi
Hak Cipta (c) 2023 Yanto, Mhd Anas Hafidz Setiawan
Artikel ini berlisensiCreative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
