Besarnya Bending Stress Pada Roda Gigi Lurus Akibat Tekanan Sepasang Roda Gigi Di Bunch Crusher PT Abc
Keywords:
Bunch Crusher, Bending moment, gears, bending stressAbstract
The object of the research observed is the magnitude of the bending stress on the straight gear that causes pressure on a pair of gears in the bundle crusher. Bunch crusher is a tool that functions to thresh the bunches left in the empty bunches by pressing the bunches between two rollers that rotate in opposite directions. At the end of the roller is a shaft and is installed two straight gears that are connected to each other and when the two straight gears are connected to each other, rotating, the gears experience bending stress. Bending stress is the stress that occurs due to the bending moment. The bending moment occurs because it is influenced by the moment arm that is formed. The study aims to determine the magnitude of the bending stress on the gears in the bundle crusher due to the pressure of a pair of gears. From the results of the study, it was concluded that the magnitude of the bending stress on the upper gear of the bunch crusher when separating the bunches from the bunches of boiled fruit is 8.8 kg/cm2. and the magnitude of the bending moment that occurs on the upper gear of the bundle crusher is 65.934 kg.cm.
References
[1] B. A. Herviandinata, A. W. Krisdiarto, And A. I. Uktoro, “Utilisasi Dan Efisiensi Truk Angkut Tandan Buah Segar (Tbs) Kelapa Sawit: Dalam Pengelolaan Perusahaan Swasta Dan Pengelolaan Kontraktor Angkutan Masyarakat”, Agroteknika, Vol. 8, No. 1, Pp. 1-15, Mar. 2025.
[2] D. F. Simatupang, N. Nelza, And L. S. Sipahutar, “Penentuan Kebutuhan Panas Pada Proses Pengeringan Inti Kelapa Sawit Di Kernel Silo Pks Xyz Langkat”, Reprokimia, Vol. 4, No. 1, Pp. 19–23, Jun. 2025.
[3] B. R. Fernandez, P. E. . Hutajulu, And R. . Sylviana Pratikha, “The Effect Of Specific Gravity Of Clay (Aluminium Hydrosilicate) On Kernel Losses At Claybath Station`S ”, Reprokimia, Vol. 2, No. 2, Pp. 9–17, Dec. 2023.
[4] I. Iqbal, S. Suhardi, And S. A. Nirisnawati, “Uji Unjuk Kerja Alat Dan Mesin Perontok Multiguna (Multipurpose Power Thresher Performance Test)”, Jrpb, Vol. 6, No. 1, Pp. 12–16, Mar. 2018.
[5] Mahyunis, M., Effendi, Z., & Tinambunan, L. R. (2023). Analisa Performance Threser Di Pabrik Kelapa Sawit (Pks) Ptpn V Sei Garo Dengan Metode Overall Equipment Effectiviness (Oee) Dan 5s. Jurnal Agro Fabrica, 5(2), 67–76. Https://Doi.Org/10.47199/Jaf.V5i2.202
[6] N. A. Sidabutar, R. . Ginting, And A. F. Malik, “Usulan Perbaikan Sarung Tangan Operasi Menggunakan, Quality Function Deployment Dan Analytic Network Process Di Pt. Xyz”, J-Milo, Vol. 1, No. 01, Pp. 1–6, Aug. 2024.
[7] B. Gabrial, S. Tangkuman, And J. Rantung, “Rancang Bangun Aplikasi Perancangan Roda Gigi Lurus Menggunakan Bahasa Pemrograman Python”, Jtm, Vol. 10, No. 1, Pp. 1–8, Jun. 2024.
[8] Muhammad Rival Tanziri And Dani Mardiyana, “Analisis Perbandingan Material 7075 O (Ss) Dan Al-Sic Untuk Komponen Roda Gigi Lurus Menggunakan Metoda Finite Elemen Analysis”, Permadi, Vol. 5, No. 1, Pp. 25-34, Aug. 2023.
[9] “Analisis Simulasi Tegangan Roda Gigi Pada Fishing Deck Machinery Tipe Hidrolik”, Asiimetrik, Vol. 2, No. 2, Pp. 77–84, Jul. 2020, Doi: 10.35814/Asiimetrik.V2i2.1369.
[10] I. Azmy And D. D. Rachmadi, “Analysis Of Sand-Casting Spur Gear From Aluminum 1100 And 6063 Towards Mechanical Properties ”, Sjmekinematika, Vol. 9, No. 2, Pp. 107-116, Jul. 2024.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Gio Fadli Situmorang, Herry Darmadi, Nurul Shadrina Bintang
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
