Perbandingan Nilai Efektivitas Kinerja Mesin Expeller Pressing Pada Proses Pergantian Screw Press Main Shaft
Kata Kunci:
Expeller Pressing, efektivitas, penggantian, Screw Press Main ShaftAbstrak
This research aims to compare the effectiveness of the Expeller Pressing machine performance before and after replacing the Screw Press Main Shaft and determine the magnitude of the increase in the percentage (%) of Crude Palm Kernel Oil (CPKO) oil after replacing the Screw Press Main Shaft, along with the use and service life of the machine. Expeller Pressing wear and tear and damage to machine components often occur, such as damage to the Screw Press Main Shaft which causes the effectiveness of machine performance to decrease. The decrease in the effectiveness of machine performance can be determined using the Overall Equipment Effectiveness (OEE) method. To increase the effectiveness of machine performance, improvements need to be made in the form of replacing the Screw Press Main Shaft. Based on the results of the discussion, the effectiveness of the Expeller Pressing machine performance before the Screw Press Main Shaft was replaced was 58% and after the replacement the machine performance effectiveness was 76%. Damage to the Screw Press Main Shaft also has an impact on the CPKO oil produced, before the replacement the percentage of oil obtained was 29.33% while after replacing the Screw Press Main Shaft the percentage of oil obtained was 44% so the percentage increase in oil after replacing the Screw Press Main Shaft is 14.67%.
Referensi
[1] A. Nugraha, W. Iftari, M. Mirnandaulia, M. Fallah, E. Pardede, And I. Rachmiadji, “Perhitungan Komposisi Air, Lumpur & Minyak Kelapa Sawit Pada Heavy Phase Di Unit Tricanter Pmks Pt. Herfinta Farm & Plantation, Labuhan Batu Selatan, Sumatera Utara,” Jurnal Agrotristek, Vol. 2, No. 1, Pp. 19–25, 2023.
[2] B. Syam, M. Muttaqin, F. Sandry, And H. Darmadi, “Analisa Eksperimental Material Komposit Diperkuat Serat Kaca Sebagai Bahan Alternatif Pembuatan Ladam Kuda,” In Talenta Conference Series: Energy And Engineering, 2021, Pp. 634–641. Doi: 10.32734/Ee.V4i1.1306.
[3] M. Hutagalung, “Nilai Tekanan Serta Efisiensi Hidrolik Sistem Otomatis Pada Proses Pengepresan Brondolan Menjadi Crude Palm Oil Unit Screw Press Pt Xy,” Jurnal Vokasi Teknik (Juvotek), Vol. 1, No. 01, Pp. 40–45, 2023, Doi: 10.12345/Xxxxx.
[4] A. Purba, B. Bukhari, And A. Nurya Savitri, “Pemotongan Daun Worm Screw Setengah Lingkaran Untuk Mengurangi Broken Nut Pada Statiun Press Pt X,” Jurnal Vokasi Teknik (Juvotek), Vol. 1, No. 01, Pp. 17–23, 2023, Doi: 10.12345/Xxxxx.
[5] S. Ula And T. Trisnawan, “Perancangan Dan Pembuatan Alat Press Hidrolik Untuk Mengambil Minyak Dari Buah Nyamplung (Calophyllum Inophyllum L),” Al Jazari Journal Of Mechanical Engineering, Vol. 1, No. 1, Pp. 18–24, 2016.
[6] B. Bukhari Et Al., “Pengaruh Kuat Arus Pengelasan …,” Momentum, Vol. 19, No. 1, Pp. 67–73, 2023, [Online]. Available: Http://Vomek.Ppj.Unp.Ac.Id.
[7] S. Malin Sutan, Y. Hendrawan, And D. A. Tipdani, “Kajian Pemanasan Pada Proses Ekstraksi Minyak Jarak Pagar (Jatropha Curcas L.) Menggunakan Hydraulic Press,” Jurnal Keteknikan Pertanian Tropis Dan Biosistem, Vol. 6, No. 1, Pp. 63–71, 2018.
[8] H. Darmadi, G. Gultom, D. Kurnia, And I. Syabil, “Pengaruh Gesekan Material Raw Mix Penyebab Keausan Terhadap Vertical Mill Pada Tyre Vertical Mill,” Jurnal Mekanova, Vol. 9, No. 1, 2023.
[9] R. Rifdah, “Pengaruh Operasi Temperatur Pemanasan,Waktu Pemanasan Terhadap Persen Yield Pada Proses Pengurasan Minyak Biji Kemiri Mengunakan Peralatan Expeller
Pressing,” Distilasi, Vol. 2, No. 1, Pp. 55–64, 2017.
[10] I. T. Hasballah And E. W. B. Siahaan, “Pengaruh Tekanan Screw Press Pada Proses Pengepresan Daging Buah Menjadi Crude Palm Oil,” Jurnal Darma Agung, Vol. Xxvi, No. 1, Pp. 722–729, 2018.
Unduhan
Diterbitkan
Terbitan
Bagian
Lisensi
Hak Cipta (c) 2023 Nurlianna Tarigan
Artikel ini berlisensiCreative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
