Analisa Beban dan Ketinggian Penumpukan Terhadap Tekanan Hidrolik Reach Stacker

Authors

  • Abdur Razaq Universitas Tjut Nyak Dhien
  • Supriadi Universitas Tjut Nyak Dhien
  • Mulia Universitas Tjut Nyak Dhien

Keywords:

Reach Stacker, Hydraulic Power, Actuator Pressure, Container, Port Terminal

Abstract

This study aims to analyze the hydraulic system performance of a reach stacker at PT. XYZ by calculating the pump power and the pressure required for the boom spreader actuator. The research methodology involved direct field observations to obtain measured operational data. The results indicate that the hydraulic power generated by the pump to circulate oil is 1.33811 kW (1.79443 HP). The required hydraulic pressure varies based on load and stacking height, with the highest values being 1.88 Bar (20 ft container) and 2.00 Bar (40 ft High Cube) at the first stacking level. As the stacking height increases to level four, the required pressure decreases to its lowest points at 0.031 Bar and 0.044 Bar, respectively. This research contributes to mapping hydraulic energy requirements in container terminal heavy equipment operations.

References

[1] A. Firdaus, Teknik Alat Berat dan Aplikasinya. Bandung: CV Multi Teknik, 2021.

[2] Budiono, Alat Berat. Semarang, Indonesia: UNNES Press, 2017.

[3] M. Dewi, S. Yuliana, and T. Rahardjo, "Evaluasi Sistem Rem Hidrolik Adaptif pada Kendaraan

Listrik," Jurnal Rekayasa Mesin, vol. 17, no. 1, pp. 45–53, 2022.

[4] R. Fadillah, "Penggunaan Fluida Nabati dalam Sistem Hidrolik," Jurnal Energi Terbarukan, vol. 12, no.

2, pp. 89–97, 2020.

[5] S. Handayani, Dasar-Dasar Sistem Kendali Hidrolik. Surabaya: Universitas Teknologi, 2021.

[6] Sutrisno, Pneumatik & Hidrolik. Yogyakarta, Indonesia: Pustaka Baru Press, 2020.

[7] T. Handoko, Peralatan Angkut dan Bongkar Muat. Yogyakarta: Andi Offset, 2018.

[8] H. Darmadi, I. Irwansyah, D. Kurnia, and R. A. Hidayat, “Amount of Frictional Force of Steel Rope Against The Bollard Due To The Loading In The Process of Towing Lorry at PT. XYZ”, satera, vol. 2, no. 1, pp. 39–47, Feb. 2024.

Published

2026-04-01

Issue

Section

Original Research Article

How to Cite

Razaq, A., Supriadi, S., & Mulia, M. (2026). Analisa Beban dan Ketinggian Penumpukan Terhadap Tekanan Hidrolik Reach Stacker. Jurnal Vokasi Teknik, 4(01), 19-31. https://mentech.id/jurnal/index.php/juvotek/article/view/119

Similar Articles

1-10 of 20

You may also start an advanced similarity search for this article.