Fenomena Kekentalan Fluida Minyak Kelapa Sawit Terhadap Kemampuan Pompa Sentrifugal Pada Unit Vacuum Dyer
Kata Kunci:
Vacuum Dryer, Centerifugal pump, impeller, Crude Palm Oil, ViscosityAbstrak
Increasing the productivity of a vacuum dryer as a water separator with oil is needed by fluid machines such as pumps. The centrifugal pump functions to pump palm oil fluid from the clean oil tank to the vacuum dryer with a capacity of 10 tons/hour. The problem found in the pump is the viscosity or thickness of the flowing fluid. This study aims to determine the phenomenon or influence of fluid viscosity on the performance of centrifugal pumps. Variations were made at a temperature of 85oC with a viscosity of 10.43 cSt, a temperature of 90oC with a viscosity of 9.45 cSt, and a temperature of 95oC with a viscosity of 8.61 cSt. Based on the results of testing and analysis, it is stated that the greater the value of the fluid viscosity, the greater the power value of the pump shaft. As the fluid temperature increases, the viscosity value of the fluid will decrease. This will reduce the working load of the pump shaft so that the rotation of the turbine is higher, the more fluid flow to be pumped and the value of the pump head will increase.
Referensi
[1] G. Ranggatama And H. Pranoto, “Analisis Perancangan Pompa Sentrifugal Pada Perancangan Shower Tester Booth Di Pt X,” Jurnal Teknik Mesin, Vol. 09, No. 2, P. 88, 2020.
[2] H. Darmadi, D. Kurnia, N. Nelza, And H. Sempana, “Analisa Ukuran Rpm Agitator Pada Washing Getah Di Unit Tangki Pencucian Pada Factory Precleaning Pt. X,” 2022.
[3] A. Jading, E. F. Tethool, P. Payung, And R. Reniana, “Pengering Pneumatik Dilengkapi Dewatering Rotary Vacuum Filter Untuk Produksi Pati Sagu Termodifikasi,” Jppm (Jurnal Pengabdian Dan Pemberdayaan Masyarakat), Vol. 5, No. 2, P. 353, Mar. 2022, Doi: 10.30595/Jppm.V5i2.5999.
[4] * Arijanto, E. Yohana, And F. T. H. Sinaga, “Analisis Pengaruh Kekentalan Fluida Air Dan Minyak Kelapa Pada Performansi Pompa Sentrifugal,” 2015.
[5] D. Subali, “Pengaruh Tanki Vakum Terhadap Perpindahan Fluida Air,” 2020. [Online]. Available: Https://Jurnal.Polines.Ac.Id/Index.Php/Rekayasa
[6] E. S. Dewi And N. Prasanti, “Analisis Kerusakan Mesin Pada Stasiun Pemurnian Yang Mempengaruhi Kadar Air Dari Kualitas Cpo Menggunakan Metode Fmea Di Pt. Ujong Neubok Dalam,” Vol. 19, No. 2, Pp. 270–276.
[7] A. W. Simanjuntak, H. Darmadi, A. A. Rahmansyah, N. Nelza, And B. Bukhari, “Analisa Pengaruh Temperatur Terhadap Laju Pengeringan Crumb Rubber Pada Dryer Menggunakan Energi Panas Pembakaran Pada Burner,” Jurnal Mekanova : Mekanikal, Inovasi Dan Teknologi, Vol. 9, No. 1, Pp. 221–227, 2023.
[8] J. Rukmana And Y. Bindar, “Rancang Bangun Alat Pengering Dengan Sistem Pengeringan Gabungan Perpindahan Panas Tidak Langsung Dan Vakum,” 2017.
[9] A. Purwanti, “Analisis Proses Pemisah Kadar Produksi Crude Palm Oil (Cpo) Di Ptp Nusantara 1 Tanjung Seumantoh-Aceh Tamiang,” 2019.
Unduhan
Diterbitkan
Terbitan
Bagian
Lisensi
Hak Cipta (c) 2023 Golfrid Gultom, M. Dimas Gunawan
Artikel ini berlisensiCreative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
