Analisa Laju Perpindahan Kalor Pada Alat Penukar Panas Kondensor Pembangkit Listrik Tenaga Uap (PLTU) di. PT XYZ
Keywords:
Heat Exchanger, Fluid flow rate, Heat transfer rateAbstract
A heat exchanger is a device used to transfer heat between two or more fluids that have different temperatures, namely a fluid with a high temperature to a fluid with a low temperature. The heat transfer is either directly or indirectly. The components contained in the heat exchanger are shell, tube, buffle. The exchange rate of heat transfer in the heat exchanger is co-current and counter-flow. The effect of the fluid flow rate on the heat transfer rate aims to determine the effect of the fluid flow rate on the heat transfer that will be obtained when the heat exchanger cools. The heat exchanger used is a shell and tube heat exchanger. Based on the results of observations and discussion, it is obtained that the value of the heat transfer rate with a different flow rate will affect the heat transfer rate obtained. from the calculation of the overall heat transfer rate with a cooling fluid flow rate of 587.1501 Kg/s of 9707788.01 Kcal/s, 588.4101 Kg/s of 9791147.36 Kcal/s and a flow rate of 589.6701 Kg/s of 10374809, 06 Kcal/s. From the graph it can be seen that the greater the flow rate of the cooling fluid, the greater the rate of heat transfer that occurs.
References
[1] M. Haris, G. Supriyanto, And H. Hermanto, “Pengaruh Tekanan Press Dan Umur Screw Terhadap Kehilangan Minyak Kelapa Sawit (Oil Losses) Di Stasiun Press,” Agroforetech, Pp. 654–662, 2023.
[2] I. Fasi, H. Darmadi, And B. Syam, “Analisa Respon Mekanik Speed Bump Paduan Bahan Concrete Foam Dan Polymeric Foam Diperkuat Serat Tandan Kelapa Sawit (Tkks) Yang Dikenai Beban Impact Jatuh Bebas,” Talenta Conference Series: Energy And Engineering (Ee), Vol. 1, No. 1, Pp. 117–122, Oct. 2018, Doi: 10.32734/Ee.V1i1.120.
[3] R. Rinaldi, S. Pranoto, And R. Afriza, “Studi Eksperimen Karakteristik Mekanik Material Screw Press Kapasitas 10-14 Ton/Jam Di Lingkungan Pabrik Kelapa Sawit,” Surya Teknika, Vol. 1, No. 4, Pp. 1–8, 2016.
[4] P. Rizky Zakaria, “Perbaikan Mesin Digester Dan Press Untuk Menurunkan Oil Losses Di Stasiun Press Dengan Metode Pdca ( Studi Kasus Di Pt. Xyz ),” Jurnal Pasti, Vol. 8, No. 2, Pp. 287–299, 2020.
[5] Rafael, “Pengendalian Proses Kehilangan Minyak Pada Air Kondensat Dan Sludge Separator Dengan Metode Statistical Process Control (Spc) Dan Contol Chart Individual-Moving Range (I-Mr) Di Pabrik Kelapa Sawit,” 2022.
[6] I. T. Hasballah And D. Prog, “Pengaruh Tekanan Screw Press Pada Proses Pengepresan Daging Buah Menjadi Crude Palm Oil,” 2018.
[7] R. Santoso, H. Lahay, S. Junus, Y. Lapai, And P. Koresponden, “Optimalisasi Perawatan Mesin Press Dengan Metode Failure Mode Effect Analysis (Fmea),” Jambura Industrial Review, Vol. 1, No. 1, P. 2021, 2021, Doi: 10.Xxxxx/Jirev.Vxix.Xx-Xx.
[8] H. Darmadi, G. Gultom, D. Kurnia, And I. Syabil, “Pengaruh Gesekan Material Raw Mix Penyebab Keausan Terhadap Vertical Mill Pada Tyre Vertical Mill,” Mekanova, Vol. 9, No. 1, Pp. 118–124, 2023.
[9] B. Bukhari, H. Darmadi, M. Iqbal Harapan Muslim Siregar, A. Noer Tambunan, P. Evencus Hutajulu, And D. Kurnia, “Pengaruh Kuat Arus Pengelasan …,” 2023. [Online]. Available: Http://Vomek.Ppj.Unp.Ac.Id.
[10] H. Darmadi, M. Mutaqqin, K. Azhari Tambunan, And R. A. Barus, “Kekuatan Dan Daya Tahan Pegas Terhadap Getaran Bandul Pada Vibrating Screen Di Stasiun Pemurnian Pks Pt. X,” Jurnal
Mekanova, Vol. 8, No. 1, Pp. 73–84, 2022.
Downloads
Published
Issue
Section
License
Copyright (c) 2023 Yanto, Erwin Pardede
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
