Perhitungan Neraca Massa Pada Unit Screw Press di PT. XYZ
Keywords:
Exstraction, Mass balance, Screw pressAbstract
Function of screw press is for extraction or separate crude oil from mesocarp based on mechanical. In extraction process based on mechanical all the mass out from digester will be extraction on unit is named screw press with capacity 12 ton/hour. In extraction process is added dillution water 9% from capacity process. This study aims to calculate mass in and out from screw press. The method is used calculating of mass balance. The mass balance is a calculation of all the materials that enter, accumulate and leave a system within a certain time. For the result of mass balance flow mass enter on screw press such as mass out from digester is 8,0604 ton/hour dan dilution water is 1,08 ton/hour. While flow mass out of screw press dregs of press is 2,352 ton/hour dan crude palm oil is 6,7884 ton/hour.
References
[1] H. Darmadi, G. Gultom, D. Kurnia, And I. Syabil, “Pengaruh Gesekan Material Raw Mix Penyebab Keausan Terhadap Vertical Mill Pada Tyre Vertical Mill,” Vol. 9, No. 1, 2023.
[2] H. Darmadi, D. Kurnia, N. Nelza, And H. Sempana, “Analisa Ukuran Rpm Agitator Pada Washing Getah Di Unit Tangki Pencucian Pada Factory Precleaning Pt. X,” 2022.
[3] T. Bantacut And H. Pasaribu, “Aliran Tertutup Massa Dan Potensi Mandiri Energi Pada Produksi Cpo Closed Mass Flows And Energy Self Sufficiency In Cpo Production,” 2015.
[4] C. Bernadeta Kubha, A. Alwa Setyorini, And A. Chumaidi, “Perhitungan Efisiensi Evaporator (V-1) Di Unit Kilang Pusat Pengembangan Sumber Daya Manusia Minyak Dan Gas Bumi Cepu,” Distilat Jurnal
Teknologi Separasi, Vol. 8, No. 3, Pp. 567–573, 2022, [Online]. Available: Http://Distilat.Polinema.Ac.Id
[5] K. Tarigan And T. Sinaga, “Analisa Perhitungan Tekanan Screw Press Pada Proses Pengepresan Daging Buah Menjadi Crude Palm Oildi Unit Pressan Pt.Pp.London Sumatera,Tbk Pks Begerpang Palm Oil Mill,” Jurnal Teknologi Mesin Uda, Vol. 1, No. 1, Pp. 47–55, 2020.
[6] O. Hikmawan, M. Naufa, And A. Tarigan, “Pengaruh Tekanan Pada Stasiun Screw Press Pabrik Pengolahan Kelapa Sawit Terhadap Kehilangan Minyak Dalam Ampas Press,” 2020.
[7] A. Tri Abadi Kec Murung Pudak, K. Tabalong, K. Selatan Yuyun Hadiyarti, I. R. Arief Akbar, And J. A. Yani Km, “Kajian Neraca Massa Pada Industri Kelapa Sawit Studi Kasus Di Pt,” 2018.
[8] D. Wardianto, “Analisis Kegagalan Mesin Screw Press Failure Analysis Of The Screw Press Machine,” Vol. 12, No. 1, Pp. 2089–4880, 2022, Doi: 10.21063/Jtm.
[9] D. Paranita, D. S. Christine Purba, And M. Raja Rangkuti, “Perhitungan Neraca Massa Pada Proses Pengambilan Minyak Pada Unit Decanter,” Ready Star - 2, Pp. 16–24, 2019.
[10] H. Widodo, W. Samsuri, And S. Ma’rif, “Analisa Dan Optimasi Produksi Sumur Migas Di Pep Bekasi,” Jurnal Bhara Petro Energi, Vol. 1, No. 2, Pp. 26–36, 2022.
[11] S. I. Agustina, “Perhitungan Neraca Panas Dan Neraca Massa Pada Proses Produksi Pelumas Di Pt. X Di Tambun Bekasi,” 2023. [Online]. Available: Http://Ejurnal.Ubharajaya.Ac.Id/Index.Php/Joeees25
Downloads
Published
Issue
Section
License
Copyright (c) 2023 Novia Nelza, Darry Christine Silowaty Purba , Agustin Nurya Savitri
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
